Nitrous Outlet
8 Cylinder Direct Port System - Two .112 Nitrous Solenoids/Two .177 Fuel Solenoids/Compact Distribution Blocks/Compression Fitt
SKU: 00-10433-L-SBT-10Vehicle Compatibility
| Year | Make | Model | Engine | Trim / Setup |
|---|
• Two .112 Pro-Mod Nitrous & Two .177 Pro-Mod Fuel Solenoids
• Eight Cylinder Direct Port System
• Wet System
• Single Stage
• Eight Titanium Vortex Ti Annular Discharge Nozzles
• Four Compact Distribution Blocks With Compression Fittings
• 20ft Of Hardline
• All Hardware, Fittings And Electrical Components Included
• Includes Jetting For 100-200-300-400HP
• 5, 7, 10 PSI Gasoline Fuel Jets Included
• Available With No Bottle, 10lb, 12lb, Or 15lb Bottle
High Horsepower:
Nitrous Outlet's 8 cylinder direct port systems are designed to be high flowing for high horsepower applications. This single stage system features two .112 Pro-Mod nitrous solenoids and two .177 Pro-Mod fuel solenoids, delivering nitrous and fuel through one Titanium Vortex Ti wet nozzle per cylinder for direct distribution. Jetting is included for 100, 200, 300, and 400 HP applications.
High Quality Construction:
Nitrous Outlet direct port systems come complete with the highest quality parts available. Direct port injection is one of the best ways to ensure equal distribution of nitrous and fuel to each cylinder. This system features eight Titanium Vortex Ti 1/16" NPT wet straight nozzles with annular discharge, four compact 1-in/4-out distribution blocks, and 20ft of hardline. Compression fittings provide secure connections while allowing the hardline to be routed neatly along the intake manifold for a clean, professional installation.
Wet System:
This is a wet system that sprays gasoline fuel and nitrous directly into each cylinder, so you will need an adequate fuel supply for the fuel solenoids, either from a compatible existing fuel system or a dedicated fuel system. This system is designed for low-pressure gasoline applications and includes fuel jetting for 5, 7, and 10 PSI fuel pressures.
Complete System:
This system includes all of the necessary components; two .112 Pro-Mod nitrous solenoids, two .177 Pro-Mod fuel solenoids, eight Titanium Vortex Ti 1/16" NPT wet nozzles, four compact distribution blocks with compression fittings, 20ft of hardline, and one gasoline jet pack for 100, 200, 300, and 400 HP applications at 5, 7, and 10 PSI fuel pressures. Additional components include two 18" 6AN braided hoses, one 192" 6AN hose, a 6AN Y fitting, a wide-open-throttle switch, a toggle switch, a 40/60 amp relay with wiring harness, 8ft each of red and blue wire, a solenoid mounting bracket, compression nuts and ferrules, installation hardware, and bottle mounting brackets. Available without a bottle or with a 10lb, 12lb, or 15lb nitrous bottle.
Application:
This system is designed for 8 cylinder vehicles with an intake manifold suitable for single stage direct port nitrous injection. Intended for gasoline applications operating at 5, 7, or 10 PSI fuel pressure.
Share

