With great anticipation, Nitrous Outlet has announced the development of a complete high performance nitrous system, components, and accessories to the all popular 2020-2021 Chevrolet C8 Stingray Corvette.
Waco, Texas - May 6th, 2021 - When someone says Nitrous Outlet you know they’re talking premium nitrous products, nothing less.
Nitrous Outlet has been developing premium nitrous systems for over 20 years and hasn’t stopped at anything to bring only the best to the drag racing industry. Their R & D, production, and manufacturing departments have been running non-stop on the development of a high performance nitrous system for the already popular 2020-2021 Chevrolet C8 Stingray Corvette. Read on to find out what Nitrous Outlet has developed.
As we all know the new C8 Corvette is fast, with it’s center engine placement, aerodynamics, 495 horsepower with its LT2 engine, and 0-60mph in 2.9 seconds. Who in there right mind would want to go any faster. Well I’ll tell you who, David Vasser, owner of Nitrous Outlet, that’s who. In development for over a year, Nitrous Outlet has developed the following systems, components, and accessories to give that two seater car the power to throw granny back in her seat on a Sunday afternoon.
The team at Nitrous Outlet have designed and tested the following components for the C8 Corvette...
GM 2020+ C8 Corvette LT2 90mm Plate System Features (PN: 00-10168)
• Flow Up To 400 HP
• E85 Compatible With Different Jetting
• Anodized Billet Aluminum Nitrous Plate
• All Hardware, Electrical, and Jetting Included
• 400+HP Solenoids
• Includes Jetting for 50-200 HP
This system is specifically designed to fit 90mm Stock LT2 C8 Corvette throttle bodies. This system comes out of the box with everything you need to spray 200 HP, and with additional jetting you can spray 400 HP. This injection plate has 6 specially designed nitrous and fuel discharge ports that completely saturate the air intake charge with the best atomized mixture possible. For higher horsepower levels proper distribution into the air stream is critical for even cylinder to cylinder distribution.
The Nitrous Outlet Vehicle Specific Nitrous system is the safest, best fitting, and most tuner friendly system available. This system is designed specifically for the 2020+ C8 Corvette 90mm Intake, including vehicle specific solenoid brackets, custom pre-bent hardlines, gaskets, and application specific hardware for the best fitment and cleanest install on the market. To make installation easier, this system includes all necessary components; billet aluminum nitrous plate, 50-200HP jetting, hardware, and wiring to properly install a wet nitrous system. This system also includes a wide open throttle (WOT) switch that only allows the system to be activated when the motor is at full throttle. This safety feature will help prevent engine damage, and lean spikes.
Solenoid Brackets Features: (PN: 00-54014)
• 2020+ C8 Corvette
• Anodized Finish
• Mounts On Intake Manifold
• Machined Aluminum
These solenoid brackets are designed specifically for the 2020+ C8 Corvette with the LT2 and mounts on throttle body for a clean installation. The solenoid brackets are custom made to easily install our solenoids in the ideal location with a show quality finish. Furthermore, these brackets are built strong enough to withstand engine vibration to keep your solenoids securely in place, and come with an extra bracket to keep the A/C lines out of the way while giving your system a custom finish.
Hardline Kit Features: (PN: 00-10168-HL)
• Pre-Bent Hard Lines
• All Hardlines, and Fittings Included
• 3/16 Stainless Tubing
• Designed For Nitrous Outlet Vehicle Specific Solenoid Brackets
The pre-fabricated hard-lines are designed to work with Nitrous Outlet bottom exit solenoids and vehicle specific solenoid brackets creating the cleanest looking installation possible. These hard lines are specifically made to fit the 2020+ C8 Corvette, and Nitrous Outlet's vehicle specific solenoid bracket. This hardline kit comes with everything you need to upgrade your current plate system from soft to hard lines for a cleaner and more professional look under the hood!
GM 2020+ C8 Corvette Purge Relocation Kit Features: (PN: 00-62011)
• Works With Any Brand System
• Evacuates Air From Main Feed Line
• All Hardware Included Relocates
• Cloud Effect To The Windshield
This purge relocation kit is specifically engineered to fit the 2020 Corvette C8. Thirteen feet of braided Nitrous line allows you to run the length of the car and tie into the windshield cowl exit purge fittings, and hardline. Due to the C8 being a first of it's kind Corvette with a mid-engine setup, the purge solenoid is located at the rear of the car, but this purge relocation kit includes the parts and hoses needed to move the purge exit to the front windshield cowl of the car if you prefer!
GM 2020+ C8 Corvette Center Console Switch Panel Features: (PN: 00-11051)
• Fits 2020-2021 C8 Corvette
• Rocker Style With LED's
• Center Console Switch Panel
• Controls System Arm, Purge, Bottle Opener, and Bottle Heater
This panel is specifically designed for the 2020+ C8 Corvette Center Console, and will add a professional touch to your nitrous system while making your accessories easier to manage. Accessory control is a finger tip away with 2 LED rocker switches for system arm and heater activation, along with a momentary switch to control remote bottle opener, and a red push button for system purge. Designed and produced with superior quality in mind, machined from billet aluminum with black anodized finish with laser etched button labels and a Nitrous Outlet logo. Furthermore this center console switch panel, and will work with any brand system, or accessories.
Nitrous Outlet GM 2020+ C8 Corvette Fender Well Mount Dedicated Fuel System (Gas/E85) (PN: 00-12036)
• Custom Built .625 Gallon Capacity
• For Use With High Or Low Pressure
• Made To Order
• Includes E85 Compatible Fuel Pump
• All Installation Hardware Included
• Aeromotive Fuel Regulator
• Proudly Made In The USA
Heavy Duty Construction:
The heavy duty construction of this fender well dedicated fuel systems come complete with a custom built hand welded fuel cell, mounting brackets, E85 compatible in-tank fuel pump, an Aeromotive fuel regulator, E85 compatible 6 AN hose, fuel lines, and fittings. All tanks are laser cut, and welded in house from .125" 5052 aluminum. Furthermore, this dedicated fuel system is race proven, designed to flow high, or low pressure by changing a spring in the fuel regulator. All dedicated nitrous fuel systems are race proven and E85 compatible allowing you the opportunity to run the corn fuel if you so desire. Going with a dedicated allows you to support a larger shot of nitrous without having to go through the expense of upgrading the factory fuel system.
Nitrous Outlet GM 2020+ C8 Corvette Trunk Mount Dedicated Fuel System (Gas/E85) (PN: 00-12019)
• Custom Built 1.375 Gallon Capacity
• Includes E85 Compatible Fuel Pump
• Made To Order
• Mounts In Front Cargo Area
• All Installation Hardware Included
• Aeromotive Fuel Regulator
• For Use With High Or Low Pressure
Heavy Duty Construction:
The heavy duty construction of the trunk dedicated fuel system come complete with a custom built hand welded fuel cell, mounting brackets, E85 compatible in-tank fuel pump, an Aeromotive fuel regulator, E85 compatible 6 AN hose, fuel lines, and fittings. All tanks are laser cut, and welded in house from .125" 5052 aluminum. Furthermore, this dedicated fuel system is race proven, designed to flow high, or low pressure by changing a spring in the fuel regulator. All dedicated nitrous fuel systems are race proven and E85 compatible allowing you the opportunity to run corn fuel if you so desire. Going with a dedicated allows you to support a larger shot of nitrous without having to go through the expense of upgrading the factory fuel system.
More Components and Accessories are in the works for the C8 Corvette:
• ProMax Wiring Harness (PN: 12-10119-PFR)
• WinMax Wiring Harness (PN: 12-10119-WFR)
About Nitrous Outlet:
Nitrous Outlet, located in Waco, TX offers an expanding inventory of nitrous products and services for vehicle specific and universal applications. After years in the aftermarket performance industry as a part retailer and install shop Nitro Dave’s LLC launched Nitrous Outlet in early 2001 with the intent of providing customers with the highest quality nitrous systems and technical support in the world. Since 2001 Nitrous Outlet has continued to lead the industry by hiring well trained knowledgeable staff and by using race proven components in all systems and accessories. In 2005 Nitrous Outlet launched its own brand of nitrous systems and accessories. For more information and availability of the new systems and components or other Nitrous Outlet products, visit nitrousoutlet.com or call (254) 848-4300.
Contact: Nitrous Outlet
Phone: (254) 848-4300
Fax: (254) 848-4316
Email: sales@nitrousoutlet.com