WinMax TPS and RPM Activated Nitrous Window Switch

What Is The WinMax Window Switch?

The WinMax is a TPS activated RPM nitrous window switch. The backlit LCD display and bright LED indicators give the best in visibility. It is an extremely user-friendly device that is easy to read and program. The detailed step-by-step instructions walk you through setting up all of the available options. Plus, its Made in the USA!

What Does The WinMax Window Switch Do?

The WinMax offers control of single or dual stage nitrous systems and single or dual trigger outputs for external timing retard units. It can be activated by rising or falling TPS signals or by a 12v WOT switch. RPM input can be configured for 1 to 12 cylinder 4-stroke engines with Distributor or coil on plug/coil near plug ignitions. It has a built-in programmable shift light as well as up to 3 programmable gear lockouts.

Why Do I Need A Nitrous Window Switch?

Any vehicle with a Throttle Position Sensor, especially Drive-by-Wire vehicles, benefit from the use of a TPS activation switch. We do not recommend activating the nitrous below 80% throttle, and the WinMax can be programmed to do this automatically. Also, activating the nitrous below 3000 RPM is not advised, so the window switch function can be programmed to activate the nitrous at or above that threshold and to deactivate it before you come up on your rev-limiter. Plus, you can program up to 3 gear lockouts, allowing you to launch and gain wheel speed before activating the nitrous so you maintain traction. Finally, the programmable shift light gives you a visual notification of your desired shift point with is bright LED indicators.