Mopar 5.7/6.1 90mm Hemi Plate System
Gain up to 400 HP. This wet nitrous plate system comes out of the box ready to spray up to 200 HP but is capable flowing up to 400 HP with additional jetting.
Superior Atomization. This injection plate has 6 specially designed nitrous and fuel discharge ports that completely saturate the air intake charge with the best atomized mixture possible. For higher horsepower levels proper distribution into the air stream is critical for equal cylinder to cylinder distribution.
Race Proven. Nitrous Outlet 5.7/6.1 Hemi plate systems are the only plate systems available that are capable of safely delivering a precise atomized mixture of nitrous and fuel into the intake plenum equally. This system includes everything needed for installation and will fit on any LX based application including Dodge Challenger, Charger, Magnum, and Chrysler 300C.
Wet Nitrous Plate. This system includes a billet aluminum plate to fit 5.7/6.1L Hemi intakes with an 90mm throttle body and is capable of flowing up to 400 HP of nitrous. Each billet plate has a black anodized finish with laser etched logo and fuel/nitrous labels.
Wide Open Throttle Activation. This system includes a wide open throttle (WOT) switch that only allows the system to be activated when the motor is at full throttle. This safety feature will prevent engine damage.
Complete System. This system includes all of the necessary components, jetting, hardware, Chrysler fuel rail adapter, and wiring to install a wet nitrous system capable of adding 200 HP to your vehicle.
Application. This system is specifically designed to fit the 5.7/6.1L Hemi intake with 90mm throttle body including the Dodge Ram, SRT-8 Jeep, Challenger, Magnum, and LX/300C.
***Please Specify if you have an Arrington or other aftermarket throttle body.***
- Item Requires Shipping
- 32.0 lbs.
- W13.0000” x H31.0000” x L13.0000”
- This item ships in its own box.
Total Reviews (0)
Write the First Review!
You must login to post a review.