Nitrous Puck Mother Pucker
The Mother Pucker Nitrous Puck provides adjustable horse power levels from 100 to 550 HP and is designed to install into most 4150/4500 flange carb or EFI single plane intake manifolds.
The unique design of the Nitrous Outlet Mother Pucker provides the most precise cylinder to cylinder distribution possible from a non-direct-port application. The Mother Pucker is installed into the machined plenum floor of the intake manifold. The Nitrous and Fuel enter through the floor of the intake plenum into the bottom of the Puck, filling the inner channel, discharging in a 360° pattern directly into each intake runner.
Not only does the Mother Pucker Nitrous Puck provide a really clean installation, but can easily be hidden, and is a perfect option for applications that have limited hood clearance.
How does the Mother Pucker compare to direct-port or Stinger nitrous plates?
- Direct Port:
The Mother Pucker is similar to a direct-port application in the sense that it is discharging directly into each individual intake runner, however you do not have the ability to adjust nitrous and fuel volume per intake runner like you would with a direct-port application.
- Stinger Nitrous Plates:
The Mother Pucker Nitrous Puck uses a similar technology used in the Nitrous Outlet Stinger plate series; in many ways it is very similar to the Stinger 3 Plate in the sense that the nitrous enters from a single entry point, filling the inner channel, discharging in a 360° pattern directly into each intake runner.
The Mother Pucker also shares the same internal flow technology as the Stinger 2 and Stinger 4, however it does differ in how the mixture of nitrous and fuel are delivered into the intake runners. Unlike the Mother Pucker Nitrous Puck the Stinger 2 and Stinger 4 are designed to saturate the intake plenums incoming air flow and allows the engine to pull the atomized mixture into each intake runner.
The Nitrous Outlet Mother Pucker is CNC machined from 6061 billet aluminum, anodized black and CNC engraved with the Nitrous Outlet logo. The Mother Pucker Nitrous Puck is designed to work in most 4150/4500 flange carb or EFI single plane intake manifolds. The installation of the Mother Pucker requires sending the intake manifold to Nitrous Outlet. Nitrous Outlet machines the intake plenum floor and installs the Mother Pucker making sure that the discharge ports perfectly align with each intake runner.
How do I get a Puck?
Orders for the Nitrous Outlet Mother Pucker are similar to our spray bar and direct port installation process. You will need to contact a Nitrous Outlet sales representative. The sales rep will work one on one with you to build a quote based upon your exact needs and intake manifold design. Once you approve the quote the sales rep will need some info from you to fill out a fabrication sheet, then provide you with a fabrication order number to write on the box when your intake manifold ships to Nitrous Outlet. Once your intake arrives to Nitrous Outlet the sales rep will contact you to let you know it arrived safely and to go over any final details. When the fabrication department and intake specialist are finished building your system the sales rep will contact you to finalize your order for shipment back to you.
Mother Pucker (Braided Hose) Flow Data
Total Reviews (0)
Write the First Review!
You must login to post a review.